How was the smoke coming out of this?
Have you checked for a vacuum leak? When its running rough, check around where the manifold bolts on and around all the vacuum lines. IF the idle...
What Richard said. Basically the same trick one would do with rods and piston pins, when replacing pistons. I know you can get an old race off, by...
I know, tedious, but follow the wiring. Sounds like you've got a short somewhere that is getting around the on/off switch.
Wow, its like every couple of years I update this thread.....I seem to be falling into a rut. ;) :D The truck has been down since last spring and...
I had that problem a couple of weeks ago. I thought maybe the owners had decided to shut it down due to lack of participation. Glad to see its...
I blew out the spiders in a '73 Chevy Vega I used to have. Big ol' hunk taken out of my pinion. I just dropped in another set of spiders and it...
You might be right. Sounds like you need to pull it apart again and inspect everything (don't forget to replace the crush sleeve when you put it...
Did you torque the nut for the pinion gear or just snug it? I ask, because it sounds like its moving as you drive and it shouldn't.....could be...
Sometimes cats will put out a burning smell too, if a car hasn't been driven in a while....keep an eye on that coolant level, too.
Coolant can have a distinct "burning" odor if dopped on something hot, but there'll be a "sweetness" to it, too. If the coolant is leaking on...
Toyota used prices are what drove me (sorry, no pun intended) to buy a Mazda back in 1992 and my current Ranger in 2012. Last I looked on CL, used...
No problem. Good luck.
...or you can just get this one off of E-Prey... [IMG] Quictent Heavy Duty Canopy White 10x20 Carport Car Tent Shelter Gazebo Garage...
Dave, Don't know If you have a spot for this, but you can build a temporary "garage" out of 4" plastic pipe and a large blue tarp. [ATTACH]...
Separate names with a comma.
