Your master cylinder is not attach to the slave. Thats why you can't move the pedal, fluid have to move somewhere.
wrinch....
You are right, it uses ATF. I would use synthetic ATF only. While at it. replace those three rubber plugs behide the shifter with steel freeze...
extra cab=short bed, standard cab=long bed. You would have to figure out what bed size you have.
correct spark plug? I would get only motorcraft plugs only.
check this website out. therangerstatioin.com, I am sure you will need a donor vehicle. You will need new wire harness for the engine. Pedal,...
You can bench bleed the master cylinder (with it off the vehicle). As for the slave cylinder every thing will need to be together (including the...
It is basically the same thing, rebuilt is using your block and heads with new pistons and all new gaskets. Remanufactured, is using someone else...
Me too, I hate seeing people throwing $$$ at their truck. These engine are really picky when come to spark plug, make sure you use ORIGINAL FORD...
Try pulling out bank 1 Sensor 1 and bank 2 sensor 1, this will make all kind of nasty noise. But if you can drive with the. 02 sensors off. I...
1 or 2 things, safety switch near the passenger kick panel or you will need original key (with chip).
rockauto or 1AAuto...
The trouble maybe at the blender door, under the radio. I would check for leaking vacuum hose..
Basic tune up.. plugs (motorcraft), wires, fuel filter, air filter, clean MAF sensor, check for crank sensor connector for oil leak, and finally...
Try reset the computer, "pull battery terminal off " about 10 minutes and the universe should aligned...
Separate names with a comma.