Open chat thread

any other wires you need to figure out where they go?

 

Join RnagerForum.com Today!

have the fire extinguisher ready lol just in case

 

or the cell phone.... and 9 hundred 11 already dialed waiting on you to hit place call..... lol

 

Welp... didnt have high hopes to start with and really dont now. Hooked all 3 wires up, turned the key and... you guessed it, nothin

 

you said you had the grey/black hooked to the pink/???? wire correct?

 

Yuppers. Hooked to the pink/orange one. Didnt even flicker. Even rewired my ground

 

Check the GEM!

 

I found a grey/yellow wire wayyy under my dash. Is that right?

 

if i'm not mistaken after 03 ford did away with the gem clinton.... i'm doing some more research so far everythign i have found says the grey/black wire needs to hook into the violet/orange coming from the pcm under the hood...

 

Theyres a pink/orange one behind my radio. Thats the one I used

 

Tap it and try it

I thought they still had them in newer models, just higher up in the dash

 

the pink/orange wont work.... the black/grey is for the VSS(vehicle speed sensor)

everythign i have found online says they did away with it.... for 03-06 they did the smart junction if i'm reading it right and then moved it again in 07+....

 

And now my door dinger wont stop... even when the doors closed

 

My electrical is gonna look like a hack job when Im done

 

Got the door to quit dinging but now my fog lights wont work

 

ok hook the wires up in this order and it should start working....

• Console Power: Grey/Yellow hooks to White/Blue (white wire with blue stripe - truck radio harness)
• Console Night Dim: Light Blue/Red or Red/Black hooks to Blue/White (blue wire with white stripe - truck radio harness)
• Console Maps: Green/Orange hooks to Violet/Red (truck radio harness)
• Console Dome: Black/Blue hooks to Green/Blue (above truck's factory dome)
• Console VSS: Grey/Black hooks to Violet/Orange (pin #1 of the truck's center PCM connector)
• Console Ground: Black hooks to truck chassis ground or you could use the OHC mounting bracket as in previous write ups...

 

No one has a good answer? I unwired EVERYTHING. Im startin from scratch. Im gonna look for wires that rae the exact same color and tap them. If they dont work, im sellin the OHC and leaving the gaping hole in my headliner

 

Thats confusing lol

 

sorry the best i could find....

 

I know, I sound like an ass but im just really stressed out over this whole thing. I honestly appreciate your help